# minimal size enclosure **URL:** \ **Category:** LulzBot TAZ\ **Created:** [September 18, 2015, 7:37am UTC](https://forum.lulzbot.com/t/minimal-size-enclosure/2245 "2015-09-18T07:37:24Z")\ **Posts on this page:** 1\ **Showing post:** 1
**Author:** ![saramos](https://avatars.discourse-cdn.com/v4/letter/s/a3d4f5/32.png) [@saramos](https://forum.lulzbot.com/u/saramos)\ **Post date:** [September 18, 2015, 7:37am UTC](https://forum.lulzbot.com/t/minimal-size-enclosure/2245/1 "2015-09-18T07:37:24Z")
Outside of a handle and latch, I finally finished my minimal sized enclosure. The dimensions are 24 1/4" wide, 26 1/4" deep and 21" high. Making the enclosure this small meant that I had to cut a hole in the side for the electronics box. As a bonus, this works out as a solution to providing cool air to the box. It also allowed me to move the LCD controller outside the box on the front, with the cables being just long enough. I drilled a small hole on one side for the USB, and a hole in the rear on the other side for the power cord. I also cut a slit on the top for the feed tube. I got the link for the printed brackets [http://www.thingiverse.com/thing:675652](http://www.thingiverse.com/thing:675652) If you want to use these brackets, I would recommend only using two screws per side on the 3 hole parts. Scott ![DSC_2331_01.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/a/a08354a09569259f52e83e76930163d083712788.jpeg) ![DSC_2333_01.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/b561bcef49ebd9cb24bf48daf9f158054199a4e1.jpeg) ![DSC_2334_01.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/2/24eaebcd32aa22f35467d0f1dca684ac8ba0c1a4.jpeg) ![DSC_2327_02.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/6/6be314a6a7e2c633a31464f51a7a27d1284855cd.jpeg) ![DSC_2329_02.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/2/251dbaa652901cfaaec71da17991eac908ce7121.jpeg) ![DSC_2330_02.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/4/430a02ac7dc34d70baf273fdb99b0aee9454689d.jpeg) --- _[View the full topic](https://forum.lulzbot.com/t/minimal-size-enclosure/2245)._