# My latest print at .08 layer and .25 nozzle

**URL:** <https://forum.lulzbot.com/t/my-latest-print-at-08-layer-and-25-nozzle/2353>\
**Category:** User's Gallery\
**Created:** [October 20, 2015, 4:31am UTC](https://forum.lulzbot.com/t/my-latest-print-at-08-layer-and-25-nozzle/2353 "2015-10-20T04:31:55Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![saramos](https://avatars.discourse-cdn.com/v4/letter/s/a3d4f5/32.png) [@saramos](https://forum.lulzbot.com/u/saramos)\
**Post date:** [October 20, 2015, 4:31am UTC](https://forum.lulzbot.com/t/my-latest-print-at-08-layer-and-25-nozzle/2353/1 "2015-10-20T04:31:55Z")

</div>

Here is a .08 layer print using a .25 nozzle I just finished. sliced and printed with Cura. I am very happy with the results!  
The total height is 1", diameter is 19/32". The print was 317 layers printed in just over 1 hour.

 ![DSC_2402.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/d/d11c6c949e843e59a52ce07d0b827111e4e8a67e.jpeg)  
 ![DSC_2396.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/b0639d13de39cecd1ced88dc5efc955d4ed44e3f.jpeg)  
 ![DSC_2386.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/f/fd2043792030989b6c87011f3a915adb01d5bad2.jpeg)  
Not too bad for a Kittaz!

Scott

---

_[View the full topic](https://forum.lulzbot.com/t/my-latest-print-at-08-layer-and-25-nozzle/2353)._