# NatureWorks 4043D PLA

**URL:** <https://forum.lulzbot.com/t/natureworks-4043d-pla/5151>\
**Category:** Filament\
**Created:** [August 11, 2017, 10:00am UTC](https://forum.lulzbot.com/t/natureworks-4043d-pla/5151 "2017-08-11T10:00:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jimbles](https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/32.png) [@Jimbles](https://forum.lulzbot.com/u/Jimbles)\
**Post date:** [August 11, 2017, 10:00am UTC](https://forum.lulzbot.com/t/natureworks-4043d-pla/5151/1 "2017-08-11T10:00:10Z")

</div>

Hey,  
I was wondering if anyone has had experience with NatureWorks 4043D PLA, which I bought from [ooznest](http://ooznest.co.uk/PLA/PLA-3D-Printer-Filament-1kg-3.00mm).

However I am having trouble getting it to print reliably. I have naively been using PLA (Village Plastics) settings in Cura 21.08 but when I try and print [this](https://www.thingiverse.com/thing:1068443) part nozzle gets blocked and its airprinting by a few layers - before it gets to any of the layers with fine structures.

Does anyone have experience with this stuff? or some cura profiles I could try?

Thanks very much!

Cheers,  
Jimbles