# nGen filament profile for 0.35 hexagon

**URL:** <https://forum.lulzbot.com/t/ngen-filament-profile-for-0-35-hexagon/4160>\
**Category:** Filament\
**Created:** [November 2, 2016, 5:23pm UTC](https://forum.lulzbot.com/t/ngen-filament-profile-for-0-35-hexagon/4160 "2016-11-02T17:23:34Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![amcbride](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@amcbride](https://forum.lulzbot.com/u/amcbride)\
**Post date:** [December 9, 2016, 10:15pm UTC](https://forum.lulzbot.com/t/ngen-filament-profile-for-0-35-hexagon/4160/4 "2016-12-09T22:15:08Z")

</div>

The default profile definitely works consistently, it’s just painfully slow. I do have a slightly modified profile that I created and it seems to work just as well. It doesn’t cut down completely on print times but it helps. I’ll attach the profile to this post.  
[nGEN\_TAZ5\_35nozzleFIXED.ini](https://forum.lulzbot.com/uploads/short-url/jPmnHu3DSYhoVMtoGUvrMm5qoZf.ini) (11 KB)

---

_[View the full topic](https://forum.lulzbot.com/t/ngen-filament-profile-for-0-35-hexagon/4160)._