# nozzle never touching washers

**URL:** <https://forum.lulzbot.com/t/nozzle-never-touching-washers/6836>\
**Category:** LulzBot Mini\
**Created:** [August 7, 2019, 11:15pm UTC](https://forum.lulzbot.com/t/nozzle-never-touching-washers/6836 "2019-08-07T23:15:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![shuggins38](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@shuggins38](https://forum.lulzbot.com/u/shuggins38)\
**Post date:** [August 7, 2019, 11:15pm UTC](https://forum.lulzbot.com/t/nozzle-never-touching-washers/6836/1 "2019-08-07T23:15:36Z")

</div>

my print nozzle never touches the washer to start the bed leveling off the noozle position is slightly behind the rear left washer. it wiped fine but never touched and i get wipe nozzle failed and tells me to cleans the nozzle which is brand new and it has been cleaned over and over as i hadnt got it past this point yet.

---

<div class="post-metadata">

**Author:** ![tyth](https://avatars.discourse-cdn.com/v4/letter/t/54ee81/32.png) [@tyth](https://forum.lulzbot.com/u/tyth)\
**Post date:** [August 8, 2019, 3:32pm UTC](https://forum.lulzbot.com/t/nozzle-never-touching-washers/6836/2 "2019-08-08T15:32:39Z")

</div>

It sounds like your x-axis may be a bit unlevel and unable to reach that corner.  
Follow this guide to get that fixed: [https://ohai.lulzbot.com/project/leveling-x-axis/maintenance-repairs/](https://ohai.lulzbot.com/project/leveling-x-axis/maintenance-repairs/)

It’s for a TAZ6 but the process is the same.

---

<div class="post-metadata">

**Author:** ![Slicedbread](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/slicedbread/32/9698_2.png) [@Slicedbread](https://forum.lulzbot.com/u/Slicedbread)\
**Post date:** [August 8, 2019, 5:09pm UTC](https://forum.lulzbot.com/t/nozzle-never-touching-washers/6836/3 "2019-08-08T17:09:32Z")

</div>

Is this a mini 1 or 2?