# OctoPrint: Lulzbot Mini Printer Profile

**URL:** <https://forum.lulzbot.com/t/octoprint-lulzbot-mini-printer-profile/3136>\
**Category:** Software\
**Created:** [March 16, 2016, 6:28am UTC](https://forum.lulzbot.com/t/octoprint-lulzbot-mini-printer-profile/3136 "2016-03-16T06:28:06Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![arky](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/arky/32/9387_2.png) [@arky](https://forum.lulzbot.com/u/arky)\
**Post date:** [March 16, 2016, 6:28am UTC](https://forum.lulzbot.com/t/octoprint-lulzbot-mini-printer-profile/3136/1 "2016-03-16T06:28:06Z")

</div>

We are deploying Octopi, a Raspberry Pi based operating system to run our Lulzbot Mini 3D printer. This makes the printer available to all network user via a web interface.

[http://octoprint.org/](http://octoprint.org/)

Unfortunately we found that there is no default printer profile available for Lulzbot Mini on this OS. Adafruit has some information for Lulzbot TAZ and there few posts about Octoprint in the Lulzbot forums.

[https://learn.adafruit.com/octoprint-open-source-host-software/configuring-octoprint-for-lulzbot-taz](https://learn.adafruit.com/octoprint-open-source-host-software/configuring-octoprint-for-lulzbot-taz)

Can someone help! Thanks!

---

_[View the full topic](https://forum.lulzbot.com/t/octoprint-lulzbot-mini-printer-profile/3136)._