# OpenBCI EEG headset

**URL:** <https://forum.lulzbot.com/t/openbci-eeg-headset/6183>\
**Category:** LulzBot Mini\
**Created:** [September 14, 2018, 9:38pm UTC](https://forum.lulzbot.com/t/openbci-eeg-headset/6183 "2018-09-14T21:38:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jp1390](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jp1390](https://forum.lulzbot.com/u/jp1390)\
**Post date:** [September 14, 2018, 9:38pm UTC](https://forum.lulzbot.com/t/openbci-eeg-headset/6183/1 "2018-09-14T21:38:31Z")

</div>

Wondering if anyone has tried printing the OpenBCI Ultracortex Mark IV EEG headset with a LulzBot?

STL Files:  
[https://github.com/OpenBCI/Ultracortex/tree/master/Mark\_IV/MarkIV-FINAL/STL\_Directory](https://github.com/OpenBCI/Ultracortex/tree/master/Mark_IV/MarkIV-FINAL/STL_Directory)

Product:  
[https://shop.openbci.com/products/ultracortex-mark-iv](https://shop.openbci.com/products/ultracortex-mark-iv)

---

<div class="post-metadata">

**Author:** ![Keebie81](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@Keebie81](https://forum.lulzbot.com/u/Keebie81)\
**Post date:** [September 15, 2018, 2:14pm UTC](https://forum.lulzbot.com/t/openbci-eeg-headset/6183/2 "2018-09-15T14:14:10Z")

</div>

I printed the helmet as one piece on a Taz 5 with the aerostruder for a customer. Came out quite well. I flipped it so the outside had the overhang and slight jaggy edges so when worn it wouldn’t catch on anything since the inside was smoother.

---

<div class="post-metadata">

**Author:** ![jp1390](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jp1390](https://forum.lulzbot.com/u/jp1390)\
**Post date:** [September 19, 2018, 7:10pm UTC](https://forum.lulzbot.com/t/openbci-eeg-headset/6183/3 "2018-09-19T19:10:57Z")

</div>

Cool. I look forward to trying this on my Mini. Unfortunately, I’ll have to do this in more than two parts as the print bed is small.