# PETG on Mini2 Settings

**URL:** <https://forum.lulzbot.com/t/petg-on-mini2-settings/27740>\
**Category:** Print Advice\
**Created:** [October 3, 2025, 11:45pm UTC](https://forum.lulzbot.com/t/petg-on-mini2-settings/27740 "2025-10-03T23:45:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dave\_KI4PSR](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@Dave\_KI4PSR](https://forum.lulzbot.com/u/Dave_KI4PSR)\
**Post date:** [October 3, 2025, 11:45pm UTC](https://forum.lulzbot.com/t/petg-on-mini2-settings/27740/1 "2025-10-03T23:45:52Z")

</div>

I’m new to PETG. I have a Mini2 that works great with PLA. The CURA selection for PETG is not working well, clumping mostly. I have researched this and will experiment now, but if someone has already solved this please chime in!

---

<div class="post-metadata">

**Author:** ![McLeach](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/mcleach/32/11215_2.png) [@McLeach](https://forum.lulzbot.com/u/McLeach)\
**Post date:** [October 6, 2025, 7:34pm UTC](https://forum.lulzbot.com/t/petg-on-mini2-settings/27740/2 "2025-10-06T19:34:36Z")

</div>

What do you mean by it is clumping?

Do you have any picture that you can share?