# Print Head Size

**URL:** <https://forum.lulzbot.com/t/print-head-size/2738>\
**Category:** Hardware\
**Created:** [January 6, 2016, 3:50pm UTC](https://forum.lulzbot.com/t/print-head-size/2738 "2016-01-06T15:50:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johannesr95](https://avatars.discourse-cdn.com/v4/letter/j/958977/32.png) [@Johannesr95](https://forum.lulzbot.com/u/Johannesr95)\
**Post date:** [January 6, 2016, 3:50pm UTC](https://forum.lulzbot.com/t/print-head-size/2738/1 "2016-01-06T15:50:31Z")

</div>

Greetings!

I was looking in Cura and found a option to “Print one at a time” but i need to set the printer head size. i was wondering if anyone had that information? I am using the Taz 5 with the LulzBot TAZ Single Extruder Tool Head v2.

Best Regards Jóhannes

---

<div class="post-metadata">

**Author:** ![chriscalandro](https://avatars.discourse-cdn.com/v4/letter/c/b5a626/32.png) [@chriscalandro](https://forum.lulzbot.com/u/chriscalandro)\
**Post date:** [January 6, 2016, 4:41pm UTC](https://forum.lulzbot.com/t/print-head-size/2738/2 "2016-01-06T16:41:41Z")

</div>

We just discussed this in the software thread.

---

<div class="post-metadata">

**Author:** ![nopick](https://avatars.discourse-cdn.com/v4/letter/n/7bcc69/32.png) [@nopick](https://forum.lulzbot.com/u/nopick)\
**Post date:** [January 6, 2016, 5:16pm UTC](https://forum.lulzbot.com/t/print-head-size/2738/3 "2016-01-06T17:16:31Z")

</div>

[https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/1](https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/1)

---

<div class="post-metadata">

**Author:** ![Johannesr95](https://avatars.discourse-cdn.com/v4/letter/j/958977/32.png) [@Johannesr95](https://forum.lulzbot.com/u/Johannesr95)\
**Post date:** [January 6, 2016, 5:38pm UTC](https://forum.lulzbot.com/t/print-head-size/2738/4 "2016-01-06T17:38:58Z")

</div>

Thank you 🙂 will try those settings