# Printing Blobs. Somebody Please Save me!

**URL:** <https://forum.lulzbot.com/t/printing-blobs-somebody-please-save-me/3145>\
**Category:** Software\
**Created:** [March 17, 2016, 5:26pm UTC](https://forum.lulzbot.com/t/printing-blobs-somebody-please-save-me/3145 "2016-03-17T17:26:39Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![FlashInPan](https://avatars.discourse-cdn.com/v4/letter/f/e19adc/32.png) [@FlashInPan](https://forum.lulzbot.com/u/FlashInPan)\
**Post date:** [March 17, 2016, 5:26pm UTC](https://forum.lulzbot.com/t/printing-blobs-somebody-please-save-me/3145/1 "2016-03-17T17:26:39Z")

</div>

I was never able to get my Mac to print to the Lulzbot Mini. So I used an old PC laptop that, although it limped along, I was able to get it to print a few models. It’s very difficult to use though. I needed to get the Lulzbot Mini to print from my Mac. Finally, in these forums, a guy username, “Firewire” gave a suggestion that totally worked by disabling “csrutil” via terminal, of which I am eternally grateful. (ref: [https://forum.lulzbot.com/viewtopic.php?f=8&t=3261&start=40](https://forum.lulzbot.com/viewtopic.php?f=8&t=3261&start=40) )

Now the problem is that whenever I send to print, by models, the same ones I printed from the PC, come out like blobs of plastic. See attachment for grizzly details. Is there some kind of calibration I have to do with this thing or what, because I don;t seem to be able to print anything. The settings are identical to the ones I used on the PC.

ANY help would be truly appreciated. 😊

 ![dangIt.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/7/79c70b2b209fccd734fceb890468f76c2a767202.jpeg)

---

_[View the full topic](https://forum.lulzbot.com/t/printing-blobs-somebody-please-save-me/3145)._