# Printing PPS-CF on Taz6

**URL:** <https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860>\
**Category:** Filament\
**Created:** [February 23, 2026, 7:08pm UTC](https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860 "2026-02-23T19:08:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tallstackdave](https://avatars.discourse-cdn.com/v4/letter/t/e9a140/32.png) [@tallstackdave](https://forum.lulzbot.com/u/tallstackdave)\
**Post date:** [February 23, 2026, 7:08pm UTC](https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860/1 "2026-02-23T19:08:27Z")

</div>

Can you print PPS-CF on the Taz6, and If so what modifications do I need to make to the printer to print this. I have already heard about the e3d pt100 thermistor, but what other software/firmware, and hardware modifications would I need to make to my printer to make this possible. Please go into as much detail as possible I am a noob with this printer, I just recently got it.

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [February 23, 2026, 8:23pm UTC](https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860/2 "2026-02-23T20:23:09Z")

</div>

If you’re a total noob with this printer, accept that it’s not the printer to do PPS-CF.

If you got a load of free PPS-CF, it _might_ be worth putting in the work, but it either requires a significant amount of knowledge to customize the printer to handle it, or a lot of money, which makes it more expensive than buying a new printer outright that was designed for that sort of application.

The Taz6 was designed around printing 2.85mm ABS very well, and it does. PPS-CF wasn’t really on anybody’s radar a decade ago when it was created. PLA was still a bit of a novelty at that time.