# problems with temperature settings

**URL:** <https://forum.lulzbot.com/t/problems-with-temperature-settings/5405>\
**Category:** Software\
**Created:** [December 8, 2017, 12:18am UTC](https://forum.lulzbot.com/t/problems-with-temperature-settings/5405 "2017-12-08T00:18:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cmax](https://avatars.discourse-cdn.com/v4/letter/c/a3d4f5/32.png) [@cmax](https://forum.lulzbot.com/u/cmax)\
**Post date:** [December 8, 2017, 12:18am UTC](https://forum.lulzbot.com/t/problems-with-temperature-settings/5405/1 "2017-12-08T00:18:32Z")

</div>

i just started printing yesterday with my new mini and the first few parts turned out great and i was very impressed but the latest version of cura kept crashing so i switched to the previous version and now when i try to print the temp settings never reach the settings recommended for the filament i am using. i have even preheated the tip and bed but before it starts printing it always cools down to 210 and 60 no matter what i choose. anyone have any ideas on what i am doing wrong?

---

<div class="post-metadata">

**Author:** ![JoeBowler300](https://avatars.discourse-cdn.com/v4/letter/j/258eb7/32.png) [@JoeBowler300](https://forum.lulzbot.com/u/JoeBowler300)\
**Post date:** [December 8, 2017, 2:10am UTC](https://forum.lulzbot.com/t/problems-with-temperature-settings/5405/2 "2017-12-08T02:10:57Z")

</div>

Have switched to Full Settings in Expert mode? There you can see your Printing temperature and Bed temperature.

---

<div class="post-metadata">

**Author:** ![cmax](https://avatars.discourse-cdn.com/v4/letter/c/a3d4f5/32.png) [@cmax](https://forum.lulzbot.com/u/cmax)\
**Post date:** [December 8, 2017, 12:12pm UTC](https://forum.lulzbot.com/t/problems-with-temperature-settings/5405/3 "2017-12-08T12:12:20Z")

</div>

> [@](#):
>
> Have switched to Full Settings in Expert mode? There you can see your Printing temperature and Bed temperature.

yes i have tried that, even the g code will have the correct temps but everytime it starts to print it brings the temps back down. as far as i can tell the machine works fine but it is stuck on those temps. hopefully i will have better luck at work today!