# Question about Lulzbot Cura

**URL:** <https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268>\
**Category:** Software\
**Created:** [December 1, 2016, 2:35pm UTC](https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268 "2016-12-01T14:35:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![CottonFX](https://avatars.discourse-cdn.com/v4/letter/c/b77776/32.png) [@CottonFX](https://forum.lulzbot.com/u/CottonFX)\
**Post date:** [December 1, 2016, 2:35pm UTC](https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268/1 "2016-12-01T14:35:16Z")

</div>

I am wondering how I can actually SEE the slicing with Cura. I can’t seem to find anything about it in documentation or in program but I know some programs allow you to slide the mouse down the model and see the layers and infill etc. I figured Cura had a way to do this but maybe I am overlooking it.

Also, I just got my Taz 6 and am wondering if I need to do any sort of firmware updates on it or how would I know if I do or not? I saw something about that in Cura I think also.

thx

---

<div class="post-metadata">

**Author:** ![nopick](https://avatars.discourse-cdn.com/v4/letter/n/7bcc69/32.png) [@nopick](https://forum.lulzbot.com/u/nopick)\
**Post date:** [December 1, 2016, 5:15pm UTC](https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268/2 "2016-12-01T17:15:07Z")

</div>

Switch to layers view with the button in the upper RH corner of the display window. In the default view, the button is labeled “normal.”

---

<div class="post-metadata">

**Author:** ![Brent.I](https://avatars.discourse-cdn.com/v4/letter/b/ecc23a/32.png) [@Brent.I](https://forum.lulzbot.com/u/Brent.I)\
**Post date:** [December 1, 2016, 10:11pm UTC](https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268/3 "2016-12-01T22:11:55Z")

</div>

If you would like to see the individual movements of the head, Cura does not currently support that. You can however load your Gcode file into the website: Gcode.ws and it will allow the scrolling function you are looking for.

---

<div class="post-metadata">

**Author:** ![CottonFX](https://avatars.discourse-cdn.com/v4/letter/c/b77776/32.png) [@CottonFX](https://forum.lulzbot.com/u/CottonFX)\
**Post date:** [December 1, 2016, 10:27pm UTC](https://forum.lulzbot.com/t/question-about-lulzbot-cura/4268/4 "2016-12-01T22:27:56Z")

</div>

> [@Brent.I](#):
>
> If you would like to see the individual movements of the head, Cura does not currently support that. You can however load your Gcode file into the website: Gcode.ws and it will allow the scrolling function you are looking for.

Both of these answers are helpful guys… Ty! I’ll try both.