# Quick Print settings

**URL:** <https://forum.lulzbot.com/t/quick-print-settings/1269>\
**Category:** Software\
**Created:** [February 12, 2015, 4:51am UTC](https://forum.lulzbot.com/t/quick-print-settings/1269 "2015-02-12T04:51:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nbart3845](https://avatars.discourse-cdn.com/v4/letter/n/6de8d8/32.png) [@nbart3845](https://forum.lulzbot.com/u/nbart3845)\
**Post date:** [February 12, 2015, 4:51am UTC](https://forum.lulzbot.com/t/quick-print-settings/1269/1 "2015-02-12T04:51:28Z")

</div>

To kind of get a reference point for fine tuning the print quality. Does anyone know what the settings are for the “Quickprint” settings on Cura?

---

<div class="post-metadata">

**Author:** ![jebba](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jebba](https://forum.lulzbot.com/u/jebba)\
**Post date:** [February 12, 2015, 8:09pm UTC](https://forum.lulzbot.com/t/quick-print-settings/1269/2 "2015-02-12T20:09:56Z")

</div>

They are just the ABS, PLA, & HIPS settings from here:

Mini: [https://www.lulzbot.com/support/mini-cura-profiles](https://www.lulzbot.com/support/mini-cura-profiles)

TAZ: [https://www.lulzbot.com/support/taz-cura-profiles](https://www.lulzbot.com/support/taz-cura-profiles)

---

<div class="post-metadata">

**Author:** ![alluvian](https://avatars.discourse-cdn.com/v4/letter/a/439d5e/32.png) [@alluvian](https://forum.lulzbot.com/u/alluvian)\
**Post date:** [February 17, 2015, 8:16pm UTC](https://forum.lulzbot.com/t/quick-print-settings/1269/3 "2015-02-17T20:16:04Z")

</div>

Is there a way to make NEW quickprints in cura? Lets say I get some settings I really like for single wall spiral t-glase, can I make a new quickprint for that?

I know I can save and import the print settings, which is good enough, but quickprint is nice sometimes if the settings are used a lot.