# Recommended nylon for Taz 6

**URL:** <https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906>\
**Category:** Filament\
**Created:** [May 21, 2017, 9:45pm UTC](https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906 "2017-05-21T21:45:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![benprusinski](https://avatars.discourse-cdn.com/v4/letter/b/c89c15/32.png) [@benprusinski](https://forum.lulzbot.com/u/benprusinski)\
**Post date:** [May 21, 2017, 9:45pm UTC](https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906/1 "2017-05-21T21:45:47Z")

</div>

I finally dialed in my new Lulzbot Taz 6 printer and love it!

What I am looking for right now are nylon filament recommendations and settings in Cura for good fast quality prints with Lulzbot Taz 6.

---

<div class="post-metadata">

**Author:** ![luler](https://avatars.discourse-cdn.com/v4/letter/l/5fc32e/32.png) [@luler](https://forum.lulzbot.com/u/luler)\
**Post date:** [May 24, 2017, 10:48pm UTC](https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906/2 "2017-05-24T22:48:38Z")

</div>

Yes, this printer is awesome

---

<div class="post-metadata">

**Author:** ![pyrokld](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/pyrokld/32/9540_2.png) [@pyrokld](https://forum.lulzbot.com/u/pyrokld)\
**Post date:** [May 24, 2017, 11:34pm UTC](https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906/3 "2017-05-24T23:34:21Z")

</div>

> [@benprusinski](#):
>
> I finally dialed in my new Lulzbot Taz 6 printer and love it!
> 
> What I am looking for right now are nylon filament recommendations and settings in Cura for good fast quality prints with Lulzbot Taz 6.

Not sure about fast, but I had good results with Taulman Bridge, the profile provided in Cura worked great. I wouldn’t let the bed fully cool before trying to remove the parts though, I did and the shrinkage on the parts pulled up a big bubble in the middle of my PEI. I eventually got it to stick back down well, but it’s not as strong as it was originally and occasionally have to smooth the bubbles back out.

---

<div class="post-metadata">

**Author:** ![benprusinski](https://avatars.discourse-cdn.com/v4/letter/b/c89c15/32.png) [@benprusinski](https://forum.lulzbot.com/u/benprusinski)\
**Post date:** [May 25, 2017, 1:33am UTC](https://forum.lulzbot.com/t/recommended-nylon-for-taz-6/4906/4 "2017-05-25T01:33:42Z")

</div>

Thanks well now printer is not working and keeps choking on PROBE FAIL CLEAN NOZ errors no matter what I do and everything tech support had me check did not fix it. So I am dead in water on the printer right now ☹