# Removeable/easy to clean bed ?

**URL:** <https://forum.lulzbot.com/t/removeable-easy-to-clean-bed/1200>\
**Category:** Hardware\
**Created:** [January 27, 2015, 9:02pm UTC](https://forum.lulzbot.com/t/removeable-easy-to-clean-bed/1200 "2015-01-27T21:02:21Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Zonyc](https://avatars.discourse-cdn.com/v4/letter/z/43a26b/32.png) [@Zonyc](https://forum.lulzbot.com/u/Zonyc)\
**Post date:** [January 30, 2015, 5:09am UTC](https://forum.lulzbot.com/t/removeable-easy-to-clean-bed/1200/8 "2015-01-30T05:09:47Z")

</div>

> [@inaki](#):
>
> Which PEI thickness are you using?

I’m actually using buildtak which is basically ultem pei with adhesive pre applied and a fancy logo. I’m not sure what the thickness is but if you are interested, here is a thread which has more details on pei: [PEI bed surface](https://forum.lulzbot.com/t/pei-bed-surface/690/1)

---

_[View the full topic](https://forum.lulzbot.com/t/removeable-easy-to-clean-bed/1200)._