# Replacement Nozzle for FlexyDually v2

**URL:** <https://forum.lulzbot.com/t/replacement-nozzle-for-flexydually-v2/4967>\
**Category:** Hardware\
**Created:** [June 13, 2017, 12:44pm UTC](https://forum.lulzbot.com/t/replacement-nozzle-for-flexydually-v2/4967 "2017-06-13T12:44:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ericach](https://avatars.discourse-cdn.com/v4/letter/e/3bc359/32.png) [@ericach](https://forum.lulzbot.com/u/ericach)\
**Post date:** [June 13, 2017, 12:44pm UTC](https://forum.lulzbot.com/t/replacement-nozzle-for-flexydually-v2/4967/1 "2017-06-13T12:44:11Z")

</div>

Does anyone out there have a source for a quality compatible 0.6mm nozzle to replace the one on the FlexyDually v2?

Lulzbot support recommended [reprapdiscount.com](http://reprapdiscount.com) (with the usual caveats about how they don’t recommend changing it), but they only have up to 0.5mm nozzles there.

How important is 0.6mm? Would it drastically reduce the function if I used 0.5mm?

---

<div class="post-metadata">

**Author:** ![uscptlb](https://avatars.discourse-cdn.com/v4/letter/u/a88e4f/32.png) [@uscptlb](https://forum.lulzbot.com/u/uscptlb)\
**Post date:** [June 23, 2017, 4:58pm UTC](https://forum.lulzbot.com/t/replacement-nozzle-for-flexydually-v2/4967/2 "2017-06-23T16:58:41Z")

</div>

MatterHackers has them both in SS and Brass. Here’s a link to the brass 0.6mm nozzle  
[http://www.matterhackers.com/store/printer-accessories/e3d-v6-extra-nozzle-3.00mm-x-0.60mm](http://www.matterhackers.com/store/printer-accessories/e3d-v6-extra-nozzle-3.00mm-x-0.60mm)

---

<div class="post-metadata">

**Author:** ![ericach](https://avatars.discourse-cdn.com/v4/letter/e/3bc359/32.png) [@ericach](https://forum.lulzbot.com/u/ericach)\
**Post date:** [July 28, 2017, 4:09pm UTC](https://forum.lulzbot.com/t/replacement-nozzle-for-flexydually-v2/4967/3 "2017-07-28T16:09:08Z")

</div>

Thank you!