# Replacing nozzle on the mini

**URL:** <https://forum.lulzbot.com/t/replacing-nozzle-on-the-mini/3612>\
**Category:** LulzBot Mini\
**Created:** [June 17, 2016, 10:53am UTC](https://forum.lulzbot.com/t/replacing-nozzle-on-the-mini/3612 "2016-06-17T10:53:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![porcine2](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/porcine2/32/83_2.png) [@porcine2](https://forum.lulzbot.com/u/porcine2)\
**Post date:** [June 17, 2016, 10:53am UTC](https://forum.lulzbot.com/t/replacing-nozzle-on-the-mini/3612/1 "2016-06-17T10:53:22Z")

</div>

Hi, I have printed 3 reels of bronze filament from colorfab all has been going well until now. The filament is collection on the nozzle and then stops extruding. How and where can I get a new nozzle and how do I install it?

---

<div class="post-metadata">

**Author:** ![ttabbal](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ttabbal](https://forum.lulzbot.com/u/ttabbal)\
**Post date:** [June 17, 2016, 2:55pm UTC](https://forum.lulzbot.com/t/replacing-nozzle-on-the-mini/3612/2 "2016-06-17T14:55:33Z")

</div>

[https://forum.lulzbot.com/t/howto-change-hexagon-hotend-nozzle/2613/1](https://forum.lulzbot.com/t/howto-change-hexagon-hotend-nozzle/2613/1)

I have that thread bookmarked for when I end up wanting to swap mine around. The Hexagon nozzles are available from a few vendors, and E3D nozzles are said to work as well.