# Show off your prints and creations **URL:** \ **Category:** User's Gallery\ **Created:** [April 4, 2013, 8:46pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44 "2013-04-04T20:46:13Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\ **Post date:** [April 4, 2013, 8:46pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/1 "2013-04-04T20:46:13Z")
Extra internet points if your printed objects are serving as replacements in the field! Be kind and link to the model if it’s available. This is one of my favorite things to play with: [Screwless Cube Gears](http://www.thingiverse.com/thing:10483) ![](https://lh5.googleusercontent.com/-8tzJotCaJHg/USWbAhsQPiI/AAAAAAAALDk/vXb725R2fzs/s902/IMAG0256.jpg) ![](https://lh5.googleusercontent.com/-wHEdzFNNrDo/USWbmFnKxeI/AAAAAAAALD0/XCOANFTlwWE/s902/IMAG0255.jpg) I’ve used these quite often: [Acrylic Box Vertex](http://www.thingiverse.com/thing:9688) by ScribbleJ ![](https://lh5.googleusercontent.com/-5eBaPjFQXB4/USWbmJSaW2I/AAAAAAAALD0/dUsV1IEk-6o/s902/IMG_20120321_223202.jpg) One of my earlier prints that I was **really** proud of: [Accessible Wade’s Extruder](http://www.thingiverse.com/thing:6713) ![](https://lh6.googleusercontent.com/-2x_HIXNtQiU/USWcQoJFqZI/AAAAAAAALEE/eYHHoc3x57s/s902/IMAG0068.jpg) ---
**Author:** ![Serenlater](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Serenlater](https://forum.lulzbot.com/u/Serenlater)\ **Post date:** [May 7, 2013, 11:41pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/2 "2013-05-07T23:41:40Z")
My first two prints after the bed calibration print to check how level the bed is. I haven’t adjusted anything but the Z axis. I raised the limit switch and set it myself just because I was afraid of it hitting the bed. Nothing special I’m just excited to have this thing. 😃 Edit: added the truck I made straight from the sdcard gcode ![image.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/1X/6a596aee0be744e94dda6681a3e4a308a6da6a94.jpeg) ![photo(1).JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/1X/286d252f620a2def64673d50421cd5b4757ad661.jpeg) ---
**Author:** ![lotw](https://avatars.discourse-cdn.com/v4/letter/l/e36b37/32.png) [@lotw](https://forum.lulzbot.com/u/lotw)\ **Post date:** [May 14, 2013, 5:04pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/3 "2013-05-14T17:04:45Z")
Here is the octo that ships, but sliced with KISSlicer and scaled to 60mm height. ![image.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/1X/746ff6d065d29d74e43e1ab0550064dae0e069f7.jpeg) ---
**Author:** ![lotw](https://avatars.discourse-cdn.com/v4/letter/l/e36b37/32.png) [@lotw](https://forum.lulzbot.com/u/lotw)\ **Post date:** [May 14, 2013, 5:06pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/4 "2013-05-14T17:06:09Z")
Here are a couple after a nice acetone vapor bath. ![image.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/1X/14e5239f9260a6687d136d63351cd415bb092cb6.jpeg) ---
**Author:** ![XRobots](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/xrobots/32/9121_2.png) [@XRobots](https://forum.lulzbot.com/u/XRobots)\ **Post date:** [May 22, 2013, 9:48pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/5 "2013-05-22T21:48:20Z")
My android legs, stands 77cm/30" tall so far, over 50 hours of print time on my AO-101 (and more pieces to make), more at: [http://xrobots.co.uk/android12/](http://xrobots.co.uk/android12/) ![](http://xrobots.co.uk/android12/android12_074_sm2.jpg) ---
**Author:** ![eric\_german](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@eric\_german](https://forum.lulzbot.com/u/eric_german)\ **Post date:** [June 25, 2013, 12:49am UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/6 "2013-06-25T00:49:02Z")
![](http://1.bp.blogspot.com/-0JkltsQeGkY/Ucjv1l1Wd1I/AAAAAAAAATg/Pq_9M8zcMe0/s800/IMG_6843.JPG) its not painted or assembled yet, but thought I’d share what my printer’s been up to the past week or so 🙂 ![](http://i.imgur.com/v9E71Io.png) ![](http://i.imgur.com/6bY5kKm.png) ---
**Author:** ![eric\_german](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@eric\_german](https://forum.lulzbot.com/u/eric_german)\ **Post date:** [July 19, 2013, 8:07pm UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/7 "2013-07-19T20:07:56Z")
and an update: [http://www.flickr.com/photos/eric\_german\_art/sets/72157634711249976/](http://www.flickr.com/photos/eric_german_art/sets/72157634711249976/) ---
**Author:** ![motominded](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/motominded/32/16_2.png) [@motominded](https://forum.lulzbot.com/u/motominded)\ **Post date:** [December 28, 2013, 3:04am UTC](https://forum.lulzbot.com/t/show-off-your-prints-and-creations/44/8 "2013-12-28T03:04:56Z")
Creations are selling on [http://www.motominded.com](http://www.motominded.com) Pillbox. Fuel Injection holder for KTM dirt bikes. ![](http://cvestal.smugmug.com/photos/i-c9GDvwc/0/O/i-c9GDvwc.jpg) Numerous brackets to fit LED lights to many dirt bikes. ![](http://cvestal.smugmug.com/photos/i-4pF5qC3/1/L/i-4pF5qC3-L.jpg) ![](http://cvestal.smugmug.com/photos/i-NKhVDvH/1/L/i-NKhVDvH-L.jpg)