# Silicone Socks for Dual Extruder v3

**URL:** <https://forum.lulzbot.com/t/silicone-socks-for-dual-extruder-v3/20333>\
**Category:** Hardware\
**Created:** [January 6, 2020, 12:10am UTC](https://forum.lulzbot.com/t/silicone-socks-for-dual-extruder-v3/20333 "2020-01-06T00:10:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcustenborder](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/jcustenborder/32/9755_2.png) [@jcustenborder](https://forum.lulzbot.com/u/jcustenborder)\
**Post date:** [January 6, 2020, 12:10am UTC](https://forum.lulzbot.com/t/silicone-socks-for-dual-extruder-v3/20333/1 "2020-01-06T00:10:37Z")

</div>

Has anyone found silicone socks that fit the v3? Mine is looking nasty after a failed print.

---

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [January 6, 2020, 1:44pm UTC](https://forum.lulzbot.com/t/silicone-socks-for-dual-extruder-v3/20333/2 "2020-01-06T13:44:21Z")

</div>

I believe [this](https://www.thingiverse.com/thing:3471088) sock mold will work. If not, contact the author to determine if he can make a mold that will work.