# slightly off x and y axis dimensions

**URL:** <https://forum.lulzbot.com/t/slightly-off-x-and-y-axis-dimensions/176>\
**Category:** LulzBot TAZ\
**Created:** [June 30, 2013, 6:52pm UTC](https://forum.lulzbot.com/t/slightly-off-x-and-y-axis-dimensions/176 "2013-06-30T18:52:32Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jebba](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jebba](https://forum.lulzbot.com/u/jebba)\
**Post date:** [July 1, 2013, 9:15pm UTC](https://forum.lulzbot.com/t/slightly-off-x-and-y-axis-dimensions/176/3 "2013-07-01T21:15:28Z")

</div>

You can temporarily set your steps via an M-code temporarily:

[http://reprap.org/wiki/G-code#M92:\_Set\_axis\_steps\_per\_unit](http://reprap.org/wiki/G-code#M92:_Set_axis_steps_per_unit)

---

_[View the full topic](https://forum.lulzbot.com/t/slightly-off-x-and-y-axis-dimensions/176)._