# SOLVED: Taz 6 auto leveling is \>0.5mm off (NOW PERFECT TO 0.01mm!)

**URL:** <https://forum.lulzbot.com/t/solved-taz-6-auto-leveling-is-0-5mm-off-now-perfect-to-0-01mm/6250>\
**Category:** LulzBot TAZ\
**Created:** [October 17, 2018, 9:25pm UTC](https://forum.lulzbot.com/t/solved-taz-6-auto-leveling-is-0-5mm-off-now-perfect-to-0-01mm/6250 "2018-10-17T21:25:56Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![cmidgley](https://avatars.discourse-cdn.com/v4/letter/c/76d3ee/32.png) [@cmidgley](https://forum.lulzbot.com/u/cmidgley)\
**Post date:** [October 19, 2018, 9:06pm UTC](https://forum.lulzbot.com/t/solved-taz-6-auto-leveling-is-0-5mm-off-now-perfect-to-0-01mm/6250/7 "2018-10-19T21:06:01Z")

</div>

Here is the STL for the shim. Good luck!  
[Leveling corner.stl](https://forum.lulzbot.com/uploads/short-url/v1BQeU8t934O2O063kcl7Revp1X.stl) (36.4 KB)

---

_[View the full topic](https://forum.lulzbot.com/t/solved-taz-6-auto-leveling-is-0-5mm-off-now-perfect-to-0-01mm/6250)._