# STL file available for TAZ 5/6 Tool Head Adapter?

**URL:** <https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444>\
**Category:** Software\
**Created:** [March 8, 2023, 12:46am UTC](https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444 "2023-03-08T00:46:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tahoemike](https://avatars.discourse-cdn.com/v4/letter/t/8dc957/32.png) [@tahoemike](https://forum.lulzbot.com/u/tahoemike)\
**Post date:** [March 8, 2023, 12:46am UTC](https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444/1 "2023-03-08T00:46:14Z")

</div>

Hi All!

Is an STL file available for the TAZ 5/6 Universal Tool Head Adapter? Thank you

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [March 8, 2023, 11:57am UTC](https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444/2 "2023-03-08T11:57:49Z")

</div>

The link is in the resources and documentation section right on the product page.

[https://download.lulzbot.com/retail\_parts/Completed\_Parts/TAZ\_5-6\_Universal\_Tool\_Head\_Adapter\_KT-CP0140/v2\_aero\_mount\_for\_taz6\_no\_switch.stl](https://download.lulzbot.com/retail_parts/Completed_Parts/TAZ_5-6_Universal_Tool_Head_Adapter_KT-CP0140/v2_aero_mount_for_taz6_no_switch.stl)

---

<div class="post-metadata">

**Author:** ![tahoemike](https://avatars.discourse-cdn.com/v4/letter/t/8dc957/32.png) [@tahoemike](https://forum.lulzbot.com/u/tahoemike)\
**Post date:** [March 8, 2023, 10:25pm UTC](https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444/3 "2023-03-08T22:25:21Z")

</div>

Thank you so much!

Would you have any information about, if I need to change the parameters: feed, speeds, retraction, etc. or perhaps change my model in Simplify3D to accommodate the filament size etc.? Thank you.

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [March 9, 2023, 1:20am UTC](https://forum.lulzbot.com/t/stl-file-available-for-taz-5-6-tool-head-adapter/25444/4 "2023-03-09T01:20:14Z")

</div>

It’s a very simple print, go with a “standard” print profile you use for ABS, PETG, or ASA. Any parts around the toolhead shouldn’t be PLA due to it’s very low softening and warping temperature.

I would also mention that if you don’t already have all the harnesses, pins and wire you need to do the wiring harness adapter as well, I recommend just paying the $30 for it to be done right.