# T-Slot clip for 80/20 extrusion 20mm

**URL:** <https://forum.lulzbot.com/t/t-slot-clip-for-80-20-extrusion-20mm/80>\
**Category:** User's Gallery\
**Created:** [May 16, 2013, 10:53pm UTC](https://forum.lulzbot.com/t/t-slot-clip-for-80-20-extrusion-20mm/80 "2013-05-16T22:53:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![antfurn](https://avatars.discourse-cdn.com/v4/letter/a/839c29/32.png) [@antfurn](https://forum.lulzbot.com/u/antfurn)\
**Post date:** [May 16, 2013, 10:53pm UTC](https://forum.lulzbot.com/t/t-slot-clip-for-80-20-extrusion-20mm/80/1 "2013-05-16T22:53:53Z")

</div>

I just created and uploaded a clip I made to attach strip LEDs to my AO-101

[http://www.thingiverse.com/thing:90069](http://www.thingiverse.com/thing:90069)

In the scad file, uncomment the LED section if you want use it as I have. Otherwise just add your own design to the top of the clip.  
It’s designed as a tight fit and needs a little filing in the gaps of the 1st layer, before trying to turn it in the slot.

Mine printed fine with pt5 nozzle and pt3 layer height.

Antony

---

<div class="post-metadata">

**Author:** ![jebba](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jebba](https://forum.lulzbot.com/u/jebba)\
**Post date:** [May 17, 2013, 5:23am UTC](https://forum.lulzbot.com/t/t-slot-clip-for-80-20-extrusion-20mm/80/2 "2013-05-17T05:23:09Z")

</div>

Cool thanks. 🙂