# TAZ 2 Print Quality Finally Sorted (Hopefully)

**URL:** <https://forum.lulzbot.com/t/taz-2-print-quality-finally-sorted-hopefully/462>\
**Category:** LulzBot TAZ\
**Created:** [February 7, 2014, 4:00pm UTC](https://forum.lulzbot.com/t/taz-2-print-quality-finally-sorted-hopefully/462 "2014-02-07T16:00:12Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![jebba](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jebba](https://forum.lulzbot.com/u/jebba)\
**Post date:** [February 15, 2014, 7:02pm UTC](https://forum.lulzbot.com/t/taz-2-print-quality-finally-sorted-hopefully/462/12 "2014-02-15T19:02:51Z")

</div>

Here’s a new one that is fast and makes a nice part:

[http://download.lulzbot.com/TAZ/3.1/software/2014Q1/slic3r/config/Fast\_ABS\_no-support\_pt35nzl\_pt28-lyr-height.ini](http://download.lulzbot.com/TAZ/3.1/software/2014Q1/slic3r/config/Fast_ABS_no-support_pt35nzl_pt28-lyr-height.ini)

New ones will land here:  
[https://www.lulzbot.com/?q=support/taz-slic3r-profiles](https://www.lulzbot.com/?q=support/taz-slic3r-profiles)

Thanks,

-Jeff

---

_[View the full topic](https://forum.lulzbot.com/t/taz-2-print-quality-finally-sorted-hopefully/462)._