# TAZ 3 print bed won't get above 94

**URL:** <https://forum.lulzbot.com/t/taz-3-print-bed-wont-get-above-94/3208>\
**Category:** LulzBot TAZ\
**Created:** [March 28, 2016, 6:08pm UTC](https://forum.lulzbot.com/t/taz-3-print-bed-wont-get-above-94/3208 "2016-03-28T18:08:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![buzbot](https://avatars.discourse-cdn.com/v4/letter/b/cab0a1/32.png) [@buzbot](https://forum.lulzbot.com/u/buzbot)\
**Post date:** [March 28, 2016, 6:08pm UTC](https://forum.lulzbot.com/t/taz-3-print-bed-wont-get-above-94/3208/1 "2016-03-28T18:08:22Z")

</div>

Hello all,

New to the forum and to 3d printing. Have made a few successful prints but am trying new setting and different things. I have noticed that my bed won’t get above 94 degrees. I built an enclosure to make sure it wasn’t just too cold in the room that the printer is in but it still won’t hit 95.

Any ideas or suggestions? I would like to get to 110.

Thanks