# Taz 4 Aerostruder

**URL:** <https://forum.lulzbot.com/t/taz-4-aerostruder/6233>\
**Category:** LulzBot TAZ\
**Created:** [October 10, 2018, 12:01am UTC](https://forum.lulzbot.com/t/taz-4-aerostruder/6233 "2018-10-10T00:01:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![beolson](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/beolson/32/9223_2.png) [@beolson](https://forum.lulzbot.com/u/beolson)\
**Post date:** [October 10, 2018, 12:01am UTC](https://forum.lulzbot.com/t/taz-4-aerostruder/6233/1 "2018-10-10T00:01:42Z")

</div>

I have a Taz 4 that has been updated with the V2C toolhead connectors. Does anyone know if the Aerostruder toolhead will work with that setup?

Thanks

---

<div class="post-metadata">

**Author:** ![Galadriel](https://avatars.discourse-cdn.com/v4/letter/g/c89c15/32.png) [@Galadriel](https://forum.lulzbot.com/u/Galadriel)\
**Post date:** [October 17, 2018, 1:29pm UTC](https://forum.lulzbot.com/t/taz-4-aerostruder/6233/2 "2018-10-17T13:29:37Z")

</div>

As long as your Taz 4 has been updated to include the necessary harnessing to run our Hexagon hotend then it will be compatible with the Aerostruder. You will just need to flash it as a Taz 5 which, as long as a PEI was also added along with the wiring changes, for all intents and purposes your printer now is.