# Taz 4 Dampers installation

**URL:** <https://forum.lulzbot.com/t/taz-4-dampers-installation/1897>\
**Category:** LulzBot TAZ\
**Created:** [June 18, 2015, 4:14am UTC](https://forum.lulzbot.com/t/taz-4-dampers-installation/1897 "2015-06-18T04:14:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![wingzero02](https://avatars.discourse-cdn.com/v4/letter/w/f4b2a3/32.png) [@wingzero02](https://forum.lulzbot.com/u/wingzero02)\
**Post date:** [June 18, 2015, 4:14am UTC](https://forum.lulzbot.com/t/taz-4-dampers-installation/1897/1 "2015-06-18T04:14:49Z")

</div>

The Taz 4 motors are pretty loud and I would to minimize it as much as possible. How difficult would it be to install stepper motor dampers? and would I need to change any settings in the printer ?

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [June 18, 2015, 8:01pm UTC](https://forum.lulzbot.com/t/taz-4-dampers-installation/1897/2 "2015-06-18T20:01:06Z")

</div>

You just bolt them in between the motor and the mounting point. 2 bolts go into the motor, 2 into the frame. You don’t need to change any firmware settings, you might need to adjust your pully positioning for the X and Y axis and the Z axis couplers.