# TAZ 4 Heated Bed

**URL:** <https://forum.lulzbot.com/t/taz-4-heated-bed/656>\
**Category:** LulzBot TAZ\
**Created:** [June 24, 2014, 2:32am UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656 "2014-06-24T02:32:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gapdev](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/gapdev/32/9174_2.png) [@gapdev](https://forum.lulzbot.com/u/gapdev)\
**Post date:** [June 24, 2014, 2:32am UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656/1 "2014-06-24T02:32:36Z")

</div>

I have ordered a Silicone Heater and Glass Bed to make an extra Heated Bed and was wondering if anyone, perhaps someone from Aleph, can tell me what is used to adhere the Heater to the Glass?

Thanks in Advance for any insights,

Kenny

---

<div class="post-metadata">

**Author:** ![Andy\_W](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@Andy\_W](https://forum.lulzbot.com/u/Andy_W)\
**Post date:** [June 24, 2014, 12:33pm UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656/2 "2014-06-24T12:33:29Z")

</div>

One side of the heater got adhesive on it. Just peel it off and clue it to the glass.  
[https://www.lulzbot.com/sites/default/files/styles/uc\_product\_full/public/p/newimages/2014/04/DSC\_0006.JPG?itok=N7Ij9nx-](https://www.lulzbot.com/sites/default/files/styles/uc_product_full/public/p/newimages/2014/04/DSC_0006.JPG?itok=N7Ij9nx-)

---

<div class="post-metadata">

**Author:** ![rufu5](https://avatars.discourse-cdn.com/v4/letter/r/f14d63/32.png) [@rufu5](https://forum.lulzbot.com/u/rufu5)\
**Post date:** [June 24, 2014, 12:35pm UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656/3 "2014-06-24T12:35:41Z")

</div>

RTV.

From the 2.1 BOM at [http://devel.lulzbot.com/TAZ/2.1/production\_docs/](http://devel.lulzbot.com/TAZ/2.1/production_docs/)

“Loctite RTV Gasket Maker/Sealant 598 Black, 49 Pound Pail”

You probably won’t need 49 pounds of it:)

---

<div class="post-metadata">

**Author:** ![gapdev](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/gapdev/32/9174_2.png) [@gapdev](https://forum.lulzbot.com/u/gapdev)\
**Post date:** [June 24, 2014, 7:01pm UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656/4 "2014-06-24T19:01:35Z")

</div>

> One side of the heater got adhesive on it. Just peel it off and clue it to the glass.

Ah, that makes sense.

Yea, I don’t know what I would do with 49 pounds of Gasket Maker!

Thanks,

Kenny

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [June 24, 2014, 8:55pm UTC](https://forum.lulzbot.com/t/taz-4-heated-bed/656/5 "2014-06-24T20:55:00Z")

</div>

3d gasket printer, obviously!