# Taz 5 Flexystruder V1 printable parts **URL:** \ **Category:** LulzBot TAZ\ **Created:** [October 3, 2017, 5:16pm UTC](https://forum.lulzbot.com/t/taz-5-flexystruder-v1-printable-parts/5233 "2017-10-03T17:16:21Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Dakotajoe](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/dakotajoe/32/37_2.png) [@Dakotajoe](https://forum.lulzbot.com/u/Dakotajoe)\ **Post date:** [October 3, 2017, 5:16pm UTC](https://forum.lulzbot.com/t/taz-5-flexystruder-v1-printable-parts/5233/1 "2017-10-03T17:16:21Z")
I have a Taz 4 that I recently upgraded to a TAZ 5. Works great. My reason for posting is my previous hot end would print Ninjaflex without much difficulty but this new hot-end binds up the filament. I understand all that so I thought I would take my older head and make a flexystruder head out of it. PROBLEM: Can’t find the files anywhere to modify it. It would be a Flexystruder V1 and all I can find are some parts for the V2 and a body for the V1. Are there any other parts? All the links to the parts I have found in the forums have come back as non existent and what I have found is just different versions of the body that the filament goes in to. Is this the only part? So… Does anyone know where the parts for printing are located for the Flexystruder V1? Thanks. ---
**Author:** ![Dakotajoe](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/dakotajoe/32/37_2.png) [@Dakotajoe](https://forum.lulzbot.com/u/Dakotajoe)\ **Post date:** [October 3, 2017, 6:16pm UTC](https://forum.lulzbot.com/t/taz-5-flexystruder-v1-printable-parts/5233/2 "2017-10-03T18:16:27Z")
On a side note, I was also wondering what the print parameters are for the parts… you know, like infill, etc… Thanks again. ---
**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\ **Post date:** [October 3, 2017, 9:53pm UTC](https://forum.lulzbot.com/t/taz-5-flexystruder-v1-printable-parts/5233/3 "2017-10-03T21:53:22Z")
Maybe… [http://download.lulzbot.com/TAZ/accessories/tool\_heads/version\_1/Flexystruder\_v1/flexystruder-1.0/stl\_&\_g-code/](http://download.lulzbot.com/TAZ/accessories/tool_heads/version_1/Flexystruder_v1/flexystruder-1.0/stl_&_g-code/) What you are looking for is there.