# Taz 5 user looking for test print on TAZ 6

**URL:** <https://forum.lulzbot.com/t/taz-5-user-looking-for-test-print-on-taz-6/5351>\
**Category:** LulzBot TAZ\
**Created:** [November 23, 2017, 7:08pm UTC](https://forum.lulzbot.com/t/taz-5-user-looking-for-test-print-on-taz-6/5351 "2017-11-23T19:08:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rturk3](https://avatars.discourse-cdn.com/v4/letter/r/eb9ed0/32.png) [@rturk3](https://forum.lulzbot.com/u/rturk3)\
**Post date:** [November 23, 2017, 7:08pm UTC](https://forum.lulzbot.com/t/taz-5-user-looking-for-test-print-on-taz-6/5351/1 "2017-11-23T19:08:47Z")

</div>

Hello all, I am a longtime TAz 5 owner and use it to print molds for silicon injection. I am looking for someone with a Taz 6 w/ MOARstruder to do a test print of one of my molds, to see if the print speed and quality justifies moving up. I am willing to pay once you’ve had a chance to see the model and Cura profile.

Thanks!

---

<div class="post-metadata">

**Author:** ![Brent.I](https://avatars.discourse-cdn.com/v4/letter/b/ecc23a/32.png) [@Brent.I](https://forum.lulzbot.com/u/Brent.I)\
**Post date:** [November 27, 2017, 4:40pm UTC](https://forum.lulzbot.com/t/taz-5-user-looking-for-test-print-on-taz-6/5351/2 "2017-11-27T16:40:33Z")

</div>

As a note, the Moarstruder is compatible with the TAZ 5 as well. Happy Printing!