# Taz 6 assembled dimensions

**URL:** <https://forum.lulzbot.com/t/taz-6-assembled-dimensions/7005>\
**Category:** LulzBot TAZ\
**Created:** [November 6, 2019, 1:06am UTC](https://forum.lulzbot.com/t/taz-6-assembled-dimensions/7005 "2019-11-06T01:06:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DirkWiggley](https://avatars.discourse-cdn.com/v4/letter/d/e495f1/32.png) [@DirkWiggley](https://forum.lulzbot.com/u/DirkWiggley)\
**Post date:** [November 6, 2019, 1:06am UTC](https://forum.lulzbot.com/t/taz-6-assembled-dimensions/7005/1 "2019-11-06T01:06:43Z")

</div>

Hi, I just moved and I brought my electronics with me. All my other stuff is with movers who pushed back delivery on my furniture a week and a half. Luckily, I took my computers and printer with me. I need a temporary table to put my Taz 6 on and I’ll be assembling the printer on the table. So my question is: what should be the minimum dimensions for the table top?

Regards,

Dirk

---

<div class="post-metadata">

**Author:** ![pehjota](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/pehjota/32/126_2.png) [@pehjota](https://forum.lulzbot.com/u/pehjota)\
**Post date:** [November 6, 2019, 11:46pm UTC](https://forum.lulzbot.com/t/taz-6-assembled-dimensions/7005/2 "2019-11-06T23:46:41Z")

</div>

If the table is pushed against a wall behind the printer, you’ll need a surface 26" (65 cm) wide by 24" (60 cm) deep. Be sure to have at least 3" (8 cm) clearance behind the Y axis assembly for the bed to travel until hitting the endstop. Also leave a bit of room around the table for overhangs: on the right side for the spool arm(s) and in front for the bed.