# Taz 6 dual extrusion?

**URL:** <https://forum.lulzbot.com/t/taz-6-dual-extrusion/24327>\
**Category:** Hardware\
**Created:** [March 16, 2022, 5:10pm UTC](https://forum.lulzbot.com/t/taz-6-dual-extrusion/24327 "2022-03-16T17:10:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Warbirds](https://avatars.discourse-cdn.com/v4/letter/w/d9b06d/32.png) [@Warbirds](https://forum.lulzbot.com/u/Warbirds)\
**Post date:** [March 16, 2022, 5:10pm UTC](https://forum.lulzbot.com/t/taz-6-dual-extrusion/24327/1 "2022-03-16T17:10:27Z")

</div>

Is there a means to convert a Taz 6 dual extruder to 1.75 filament?

I have a Taz 6 Dual extruder V3- I have never set it up.

---

<div class="post-metadata">

**Author:** ![KylJoy](https://avatars.discourse-cdn.com/v4/letter/k/f17d59/32.png) [@KylJoy](https://forum.lulzbot.com/u/KylJoy)\
**Post date:** [December 20, 2022, 5:42pm UTC](https://forum.lulzbot.com/t/taz-6-dual-extrusion/24327/2 "2022-12-20T17:42:14Z")

</div>

I’d love to find a parts list, etc., too.