# Taz 6 Elapsed Time

**URL:** <https://forum.lulzbot.com/t/taz-6-elapsed-time/3613>\
**Category:** Software\
**Created:** [June 17, 2016, 3:01pm UTC](https://forum.lulzbot.com/t/taz-6-elapsed-time/3613 "2016-06-17T15:01:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pacbayjeff](https://avatars.discourse-cdn.com/v4/letter/p/47e85d/32.png) [@pacbayjeff](https://forum.lulzbot.com/u/pacbayjeff)\
**Post date:** [June 17, 2016, 3:01pm UTC](https://forum.lulzbot.com/t/taz-6-elapsed-time/3613/1 "2016-06-17T15:01:09Z")

</div>

I just purchased a new taz 6. On page 57 and page 58 of the taz 6 user manual. It shows the GLCD info screen. Items 7 and 8 called Current Print Time (#7) and Progress Bar (#8).

When I print an item from cura, the lcd screen does not show the progress or time.

What do I do to enable this feature?

---

<div class="post-metadata">

**Author:** ![Sebastian](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@Sebastian](https://forum.lulzbot.com/u/Sebastian)\
**Post date:** [June 17, 2016, 3:15pm UTC](https://forum.lulzbot.com/t/taz-6-elapsed-time/3613/2 "2016-06-17T15:15:21Z")

</div>

I guess the old (old is relative, it’s the latest stable release) Marlin FW they use as a basis for the TAZ 6 doesn’t show the bar during an USB print. Both will only be visible when you print from SD card.