# TAZ 6 Heated Bed Not Heating - Perplexing Puzzle - \[EDIT - SOLVED!! Heater pin melted on RAMBo!\]

**URL:** <https://forum.lulzbot.com/t/taz-6-heated-bed-not-heating-perplexing-puzzle-edit-solved-heater-pin-melted-on-rambo/5178>\
**Category:** LulzBot TAZ\
**Created:** [August 29, 2017, 6:31pm UTC](https://forum.lulzbot.com/t/taz-6-heated-bed-not-heating-perplexing-puzzle-edit-solved-heater-pin-melted-on-rambo/5178 "2017-08-29T18:31:40Z")\
**Posts on this page:** 1\
**Showing post:** 21

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [September 7, 2017, 3:15pm UTC](https://forum.lulzbot.com/t/taz-6-heated-bed-not-heating-perplexing-puzzle-edit-solved-heater-pin-melted-on-rambo/5178/21 "2017-09-07T15:15:13Z")

</div>

I just measured on the Taz 6 I am building that is on the bench front of me, and when I turn on the heat bed the right most heat bed pin reads 24 volts on the connector and ~2.5-3.3 volts on the one right beside it.

---

_[View the full topic](https://forum.lulzbot.com/t/taz-6-heated-bed-not-heating-perplexing-puzzle-edit-solved-heater-pin-melted-on-rambo/5178)._