# Taz 6 lead screw info

**URL:** <https://forum.lulzbot.com/t/taz-6-lead-screw-info/5915>\
**Category:** Hardware\
**Created:** [May 28, 2018, 7:11pm UTC](https://forum.lulzbot.com/t/taz-6-lead-screw-info/5915 "2018-05-28T19:11:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aliceppc](https://avatars.discourse-cdn.com/v4/letter/a/f04885/32.png) [@aliceppc](https://forum.lulzbot.com/u/aliceppc)\
**Post date:** [May 28, 2018, 7:11pm UTC](https://forum.lulzbot.com/t/taz-6-lead-screw-info/5915/1 "2018-05-28T19:11:48Z")

</div>

Hello.  
Stainless Steel Lead Screw, 12mm x 420mm for Taz 6 are standar ?  
I want to make clone of taz 6 and now collect information  
Best regards  
Jose

---

<div class="post-metadata">

**Author:** ![Galadriel](https://avatars.discourse-cdn.com/v4/letter/g/c89c15/32.png) [@Galadriel](https://forum.lulzbot.com/u/Galadriel)\
**Post date:** [May 30, 2018, 1:07pm UTC](https://forum.lulzbot.com/t/taz-6-lead-screw-info/5915/2 "2018-05-30T13:07:39Z")

</div>

Here in a link to the page that has the bill of materials and other documentation on the Taz 6.  
[http://devel.lulzbot.com/TAZ/Olive/production\_docs/](http://devel.lulzbot.com/TAZ/Olive/production_docs/)  
And our Open Hardware Assembly Instructions for building the Taz 6: [https://ohai.lulzbot.com/group/taz-6/](https://ohai.lulzbot.com/group/taz-6/)  
These should give you a good jumping off point!