# Taz 6 Makers series Filament **URL:** \ **Category:** Filament\ **Created:** [November 29, 2018, 6:05pm UTC](https://forum.lulzbot.com/t/taz-6-makers-series-filament/6332 "2018-11-29T18:05:51Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![troma76](https://avatars.discourse-cdn.com/v4/letter/t/e68b1a/32.png) [@troma76](https://forum.lulzbot.com/u/troma76)\ **Post date:** [November 29, 2018, 6:05pm UTC](https://forum.lulzbot.com/t/taz-6-makers-series-filament/6332/1 "2018-11-29T18:05:51Z")
I am very new to 3D printing ( on item number 8) . We got a bunch of spools of Makers series Filament. The first project i ran with it i went for 230c for the nozzle and 80 c for the bed and got a Bunch if stringing on my text. Does anyone have an experience with this filament ? Or have any suggestions on settings for my TAZ 6 that might make a cleaner print? ![Capture13.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/b67afcec56038b7530423518e274f5c65bd95a00.jpeg) ---
**Author:** ![OldTimer](https://avatars.discourse-cdn.com/v4/letter/o/8797f3/32.png) [@OldTimer](https://forum.lulzbot.com/u/OldTimer)\ **Post date:** [December 1, 2018, 12:33am UTC](https://forum.lulzbot.com/t/taz-6-makers-series-filament/6332/2 "2018-12-01T00:33:47Z")
I also have a problem with their filament. I’ll keep checking back. Let me know if you find a solution. ---
**Author:** ![Galadriel](https://avatars.discourse-cdn.com/v4/letter/g/c89c15/32.png) [@Galadriel](https://forum.lulzbot.com/u/Galadriel)\ **Post date:** [December 3, 2018, 3:54pm UTC](https://forum.lulzbot.com/t/taz-6-makers-series-filament/6332/3 "2018-12-03T15:54:48Z")
To give you accurate information about settings that might help with improving your print quality we will need a bit more information about the filament you are printing with. Could you post some photos of the label on your filament roll? Looking on the maker geek website I saw both PLA and ABS in their maker series as well as different filament diameters, these factors will have a big effect on the settings needed for any filament so without this information it’s almost impossible to give good suggestions.