# TAZ 6 Troubleshooting for Student Use **URL:** \ **Category:** LulzBot TAZ\ **Created:** [March 15, 2024, 5:13pm UTC](https://forum.lulzbot.com/t/taz-6-troubleshooting-for-student-use/26491 "2024-03-15T17:13:28Z")\ **Posts on this page:** 1\ **Showing post:** 36
**Author:** ![jpost22](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jpost22](https://forum.lulzbot.com/u/jpost22)\ **Post date:** [March 25, 2024, 8:43pm UTC](https://forum.lulzbot.com/t/taz-6-troubleshooting-for-student-use/26491/36 "2024-03-25T20:43:44Z")
Quick update. I used one of our other printers to print out the [latch jig mentioned in this thread](https://forum.lulzbot.com/t/hobbed-bolt-clogging-filament-stuck/1739/2) and adjusted the latch screws accordingly. I’m not sure of how much this will help, but it’s a step in the right direction. Next: if there’s a clog, like my professor suspects, it’s either inconsistent in its cloggery, or just enough to screw up prints _sometimes_. And pull after pull, the hobbed bolt only seems to be digging in _so much!_ Just enough to push the filament, that’s what it looks like to me, if a bit tense. And of course, when it purges after loading a filament… ![image](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/4/43daea25048247c94d8de24617987c515be2ab1f.jpeg) That looks normal! That’s what baffles me about all of this, is that parts of it work that you wouldn’t expect to work. The things that _don’t fail_ are the things we’d normally look at when a printer isn’t behaving correctly. And the things that _do fail_ almost feel like they have no rhyme or reason to their failure, unless it’s a needlessly complex problem or a super simple one that we’re overlooking. **Edit: I screwed up in the slicer, disregard prior images** I’m nearing my wit’s end… not saying I’m giving up, but man this machine is driving me nuts. I’m close to just taking a video of it and seeing if anything can possibly be diagnosed from that. --- _[View the full topic](https://forum.lulzbot.com/t/taz-6-troubleshooting-for-student-use/26491)._