# TAZ Pro S - Is it a brand new model?

**URL:** <https://forum.lulzbot.com/t/taz-pro-s-is-it-a-brand-new-model/24333>\
**Category:** General\
**Created:** [March 18, 2022, 1:57am UTC](https://forum.lulzbot.com/t/taz-pro-s-is-it-a-brand-new-model/24333 "2022-03-18T01:57:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![The2x4](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/the2x4/32/11669_2.png) [@The2x4](https://forum.lulzbot.com/u/The2x4)\
**Post date:** [March 18, 2022, 1:57am UTC](https://forum.lulzbot.com/t/taz-pro-s-is-it-a-brand-new-model/24333/1 "2022-03-18T01:57:39Z")

</div>

Hey Everyone!

I’m brand new here, and have a TAZ Pro S on the way, and just realized I can’t find anything on it specifically, including in the CURA software.

Is the ‘TAZ Pro S’ a brand new model, and thus doesn’t have all the support yet, or is it simply the ‘TAZ Pro’ with only 1 head, so everything works the same & I just go with that for everything, (but obviously try to not do anything that needs a dual head)?

Thanks in advance!  
-The2x4

---

<div class="post-metadata">

**Author:** ![cdsmith](https://avatars.discourse-cdn.com/v4/letter/c/22d042/32.png) [@cdsmith](https://forum.lulzbot.com/u/cdsmith)\
**Post date:** [March 18, 2022, 4:31am UTC](https://forum.lulzbot.com/t/taz-pro-s-is-it-a-brand-new-model/24333/2 "2022-03-18T04:31:41Z")

</div>

It is not specifically called “Pro S” in Cura. In Add Printer just pick “Taz Pro” and then under tool heads pick “M175v2” and you should be good to go.
