# Taz Pro with Simplify3D

**URL:** <https://forum.lulzbot.com/t/taz-pro-with-simplify3d/21537>\
**Category:** Uncategorized\
**Created:** [April 30, 2020, 7:17pm UTC](https://forum.lulzbot.com/t/taz-pro-with-simplify3d/21537 "2020-04-30T19:17:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![biomechanic](https://avatars.discourse-cdn.com/v4/letter/b/e99b99/32.png) [@biomechanic](https://forum.lulzbot.com/u/biomechanic)\
**Post date:** [April 30, 2020, 7:17pm UTC](https://forum.lulzbot.com/t/taz-pro-with-simplify3d/21537/1 "2020-04-30T19:17:24Z")

</div>

Hello,

I am considering upgrading my printer to a Taz Pro. I need to use some of functionality built into Simplify3D. I reached out to Simplify3D and although the Taz Pro is not listed on the " Check Compatibility" section they sent me a profile.

I do not have a machine available to me to test it with. Any users out there using the Taz Pro with Simplify3D?

Thanks

---

<div class="post-metadata">

**Author:** ![DuBDzO](https://avatars.discourse-cdn.com/v4/letter/d/74df32/32.png) [@DuBDzO](https://forum.lulzbot.com/u/DuBDzO)\
**Post date:** [July 15, 2021, 9:47pm UTC](https://forum.lulzbot.com/t/taz-pro-with-simplify3d/21537/2 "2021-07-15T21:47:12Z")

</div>

hey this is really late but do you happen to have that file? intetesting in trying it out since i really hate using cura

---

<div class="post-metadata">

**Author:** ![h0wkeye](https://avatars.discourse-cdn.com/v4/letter/h/5fc32e/32.png) [@h0wkeye](https://forum.lulzbot.com/u/h0wkeye)\
**Post date:** [January 8, 2022, 3:34pm UTC](https://forum.lulzbot.com/t/taz-pro-with-simplify3d/21537/3 "2022-01-08T15:34:39Z")

</div>

I have Simplify3D as well. Going to set up my Taz Pro to use it. Did you end up getting a configuration file?