# taz5  print

**URL:** <https://forum.lulzbot.com/t/taz5-print/1706>\
**Category:** Hardware\
**Created:** [April 29, 2015, 12:14pm UTC](https://forum.lulzbot.com/t/taz5-print/1706 "2015-04-29T12:14:40Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![fleckstar](https://avatars.discourse-cdn.com/v4/letter/f/73ab20/32.png) [@fleckstar](https://forum.lulzbot.com/u/fleckstar)\
**Post date:** [May 23, 2015, 1:37am UTC](https://forum.lulzbot.com/t/taz5-print/1706/21 "2015-05-23T01:37:18Z")

</div>

Hi guys did another 5 hour print base came out great but the end height did not bond this is the image, using pla temp 210 bed 70 changed settings and i put the file through another slicer a little better but did not bond, the flow of the pla is  
smooth and even bed is level and i changed the thickness of the layers the infill not bonding what can i do,  
thanlks

 ![DSC_0012.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/6/6d424df3d370916c16e208dc169d99a1a7ac7107.jpeg)

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [May 23, 2015, 6:35am UTC](https://forum.lulzbot.com/t/taz5-print/1706/22 "2015-05-23T06:35:43Z")

</div>

Can you upload a better picture when you get a chance? that ones not in focus enough to see what is going on really.

[Previous page](https://forum.lulzbot.com/t/taz5-print/1706.md?page=1)