# TAZ5 Slic3r profiles, same as TAZ4?

**URL:** <https://forum.lulzbot.com/t/taz5-slic3r-profiles-same-as-taz4/1320>\
**Category:** LulzBot TAZ\
**Created:** [February 22, 2015, 12:09am UTC](https://forum.lulzbot.com/t/taz5-slic3r-profiles-same-as-taz4/1320 "2015-02-22T00:09:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![inaki](https://avatars.discourse-cdn.com/v4/letter/i/7993a0/32.png) [@inaki](https://forum.lulzbot.com/u/inaki)\
**Post date:** [February 22, 2015, 12:09am UTC](https://forum.lulzbot.com/t/taz5-slic3r-profiles-same-as-taz4/1320/1 "2015-02-22T00:09:03Z")

</div>

Hi.  
Does the TAZ5 use the same Slic3r profiles than TAZ4 ?

inaki.

---

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [February 23, 2015, 2:32pm UTC](https://forum.lulzbot.com/t/taz5-slic3r-profiles-same-as-taz4/1320/2 "2015-02-23T14:32:48Z")

</div>

For now it does, but we’re working on specific Hexagon slicing profiles for the TAZ. You can generally print at about 10 degrees hotter and get great results.