# The case fan

**URL:** <https://forum.lulzbot.com/t/the-case-fan/4476>\
**Category:** LulzBot TAZ\
**Created:** [January 22, 2017, 5:21am UTC](https://forum.lulzbot.com/t/the-case-fan/4476 "2017-01-22T05:21:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [January 22, 2017, 5:21am UTC](https://forum.lulzbot.com/t/the-case-fan/4476/1 "2017-01-22T05:21:43Z")

</div>

So, I managed to somehow have the main power switch in my Taz 3-ish unit melt itself. Not a huge deal because I have a spare, but when reinstalling it I managed to inadvertantly remove a wire from my case cooling fan. The one that shipped with my Taz indicates that it is a Pelonis 12v 80mm fan. I’m thinking that it should now be a 24v fan with essentially Taz 5 firmware on this machine? I managed to find a fan I think will be suitable, but i’m not 100% sure since the 12v fan is throwing me for a bit of a loop here.

Also why does the lulzbot store and Itworks3d both not sell replacements of that???

---

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [January 22, 2017, 6:36pm UTC](https://forum.lulzbot.com/t/the-case-fan/4476/2 "2017-01-22T18:36:51Z")

</div>

> [@piercet](#):
>
> So, I managed to somehow have the main power switch in my Taz 3-ish unit melt itself. Not a huge deal because I have a spare, but when reinstalling it I managed to inadvertantly remove a wire from my case cooling fan. The one that shipped with my Taz indicates that it is a Pelonis 12v 80mm fan. I’m thinking that it should now be a 24v fan with essentially Taz 5 firmware on this machine? I managed to find a fan I think will be suitable, but i’m not 100% sure since the 12v fan is throwing me for a bit of a loop here.
> 
> Also why does the lulzbot store and Itworks3d both not sell replacements of that???

Yes, If you upgrade to a 24 volt supply you should get a new 24 volt Case fan. The 12 volt fan will be very loud as it is running at twice the needed voltage, and I believe might burn out faster. I see that IT-Works3D has the 24 volt 4 wire fan, they might not be as quiet as the old one. I have had loud and very quiet ones both, so YMMV.
