# Tips on prints that fit together

**URL:** <https://forum.lulzbot.com/t/tips-on-prints-that-fit-together/5964>\
**Category:** LulzBot Mini\
**Created:** [June 18, 2018, 8:34pm UTC](https://forum.lulzbot.com/t/tips-on-prints-that-fit-together/5964 "2018-06-18T20:34:14Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![verersatz](https://avatars.discourse-cdn.com/v4/letter/v/ecc23a/32.png) [@verersatz](https://forum.lulzbot.com/u/verersatz)\
**Post date:** [June 18, 2018, 8:34pm UTC](https://forum.lulzbot.com/t/tips-on-prints-that-fit-together/5964/1 "2018-06-18T20:34:14Z")

</div>

A consistent problem I’ve had with my Lulzbot Mini is printing objects that are supposed to fit together. These are usually designs created by someone else, so I know they are being designed for different slicers and printers.

Does anyone have any tips on how to achieve better prints that will actually fit together like they should? I use Cura for slicing and printing. What settings should I be adjusting? Is there some component of the actual hardware I should be adjusting? I’m sure there are ways to improve my results but I’m just not sure what they are, so any suggestions are appreciated.

---

_[View the full topic](https://forum.lulzbot.com/t/tips-on-prints-that-fit-together/5964)._