# Titan Aero? Anyone consider installing one?

**URL:** <https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985>\
**Category:** LulzBot TAZ\
**Created:** [June 20, 2017, 3:35pm UTC](https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985 "2017-06-20T15:35:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![PeterT](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@PeterT](https://forum.lulzbot.com/u/PeterT)\
**Post date:** [June 20, 2017, 3:35pm UTC](https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985/1 "2017-06-20T15:35:34Z")

</div>

Curious if this would make for a clean all in one (hard and flex material) head.

---

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [June 20, 2017, 11:18pm UTC](https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985/2 "2017-06-20T23:18:26Z")

</div>

Maybe.

[https://itworks3d.com/product/lulzbot-taz-e3d-titan-aero-toolhead/](https://itworks3d.com/product/lulzbot-taz-e3d-titan-aero-toolhead/)

---

<div class="post-metadata">

**Author:** ![shawnbot](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@shawnbot](https://forum.lulzbot.com/u/shawnbot)\
**Post date:** [July 3, 2017, 1:55pm UTC](https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985/3 "2017-07-03T13:55:49Z")

</div>

Just put an order in for one off of ITWorks, will update here when I get it if I remember to.

---

<div class="post-metadata">

**Author:** ![shawnbot](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@shawnbot](https://forum.lulzbot.com/u/shawnbot)\
**Post date:** [July 15, 2017, 8:13pm UTC](https://forum.lulzbot.com/t/titan-aero-anyone-consider-installing-one/4985/4 "2017-07-15T20:13:58Z")

</div>

Okay had the Titan Aero installed for about a week now. Spent most of my time re-calibrating do to issues with the printer not the extruder but I printed off a few functional parts and a benchy and I think they came out very well. I got the 1.75 version with a .4 nozzle and printed at .2 layer height.

Have not tested flexible material though and I think that is half the reason why you would want to go with this extruder but if I do get some TPU and remember to post pack here I will.

One side note I did run into one issue where the extruder will strip the filament when I ran though my start up script but all I had to do was dial down the extrusion rate in the script it started to work as expected.

Also as we speak printing out a Warhammer 4K figure for my brother in-law with a .25 nozzle at .1 layer height. I will try and pull off the support and send a picture of it as well once it is finished.

 ![IMG_20170715_145948.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/6/6589fc1a6a5cd224399081a949efa0eaaafd8cc0.jpeg)  
 ![IMG_20170715_145926.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/3/328372efe668a5885f50f922baea5959c72e9f77.jpeg)