# Trying to set up "One at a time" Printing

**URL:** <https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760>\
**Category:** Software\
**Created:** [January 10, 2016, 11:38pm UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760 "2016-01-10T23:38:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jaconcox](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@jaconcox](https://forum.lulzbot.com/u/jaconcox)\
**Post date:** [January 10, 2016, 11:38pm UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760/1 "2016-01-10T23:38:00Z")

</div>

As the title says I am trying to set up “One at a time printing” in Cura.

Are there any directions online that I can find. My search has come up with nothing.

Thanks

---

<div class="post-metadata">

**Author:** ![chriscalandro](https://avatars.discourse-cdn.com/v4/letter/c/b5a626/32.png) [@chriscalandro](https://forum.lulzbot.com/u/chriscalandro)\
**Post date:** [January 11, 2016, 12:29pm UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760/2 "2016-01-11T12:29:43Z")

</div>

Well you should search again because we just had a discussion about it in the software forum.

---

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [January 11, 2016, 1:28pm UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760/3 "2016-01-11T13:28:47Z")

</div>

Try “sequential printing” .

---

<div class="post-metadata">

**Author:** ![jaconcox](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@jaconcox](https://forum.lulzbot.com/u/jaconcox)\
**Post date:** [January 11, 2016, 4:10pm UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760/4 "2016-01-11T16:10:54Z")

</div>

> [@chriscalandro](#):
>
> Well you should search again because we just had a discussion about it in the software forum.

Well thanks for linking me to the discussion. 😆

Also, I can’t search for “one at a time printing” because it says there are too many small words.

When I look up Sequential printing all I find is a post about a feature they want to be included in the future.

I’ll keep looking

Edit: Only been able to find this post "[Printer Head Size in Cura - #11 by nopick](https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/11) going to see if these dimensions work. Thanks for the tip on searching for “Sequential printing” instead!

Edit 2: Just made these changes, but the printer still will not even attempt to print the objects one at a time. Nozzle is still moving from object to object. Putting down one layer then moving back to the other object.

---

<div class="post-metadata">

**Author:** ![geburges](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/geburges/32/76_2.png) [@geburges](https://forum.lulzbot.com/u/geburges)\
**Post date:** [January 12, 2016, 2:35am UTC](https://forum.lulzbot.com/t/trying-to-set-up-one-at-a-time-printing/2760/5 "2016-01-12T02:35:25Z")

</div>

Try this thread [https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/1](https://forum.lulzbot.com/t/printer-head-size-in-cura/2647/1)

I’m not surprised that you didn’t find it. The title doesn’t clearly link it to what you’re looking for.