# Wireless mini possible?

**URL:** <https://forum.lulzbot.com/t/wireless-mini-possible/24693>\
**Category:** LulzBot Mini\
**Created:** [July 13, 2022, 12:02am UTC](https://forum.lulzbot.com/t/wireless-mini-possible/24693 "2022-07-13T00:02:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jpilot56](https://avatars.discourse-cdn.com/v4/letter/j/ed8c4c/32.png) [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\
**Post date:** [July 13, 2022, 12:02am UTC](https://forum.lulzbot.com/t/wireless-mini-possible/24693/1 "2022-07-13T00:02:04Z")

</div>

Is there a way to wirelessly connect my Mac to a Mini?

---

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [July 13, 2022, 1:06pm UTC](https://forum.lulzbot.com/t/wireless-mini-possible/24693/2 "2022-07-13T13:06:13Z")

</div>

I have my TAZ 6 connected to a Raspberry Pi 3B running [OctoPi / OctoPrint](https://octoprint.org/). The RPi is connected to my LAN using WiFi. Many slicers (including CuraLE) have a option to send directly to OctoPrint. You can monitor your printer from any browser. There is also support for cameras (either RPi direct connect or USB).

An RPi Zero 2, RPi 3B (and 3B+), or any RPi 4 will work. Biggest problem ATM is finding one for anything close to the suggested retail price. OctoPrint can be installed on just about anything that can run Python 3 including old cell phones but IMO, a RPi provides the best experience.

---

<div class="post-metadata">

**Author:** ![jpilot56](https://avatars.discourse-cdn.com/v4/letter/j/ed8c4c/32.png) [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\
**Post date:** [July 14, 2022, 1:20am UTC](https://forum.lulzbot.com/t/wireless-mini-possible/24693/3 "2022-07-14T01:20:19Z")

</div>

Thanks a lot. I’ll work on this!