# Workhorse Bed is not level after bed levelling

**URL:** <https://forum.lulzbot.com/t/workhorse-bed-is-not-level-after-bed-levelling/22903>\
**Category:** Hardware\
**Created:** [January 22, 2021, 8:27pm UTC](https://forum.lulzbot.com/t/workhorse-bed-is-not-level-after-bed-levelling/22903 "2021-01-22T20:27:11Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![gdyne](https://avatars.discourse-cdn.com/v4/letter/g/2bfe46/32.png) [@gdyne](https://forum.lulzbot.com/u/gdyne)\
**Post date:** [April 6, 2021, 6:01am UTC](https://forum.lulzbot.com/t/workhorse-bed-is-not-level-after-bed-levelling/22903/10 "2021-04-06T06:01:26Z")

</div>

I had similar issues with the 1st layer being inconsistent across the bed area, documented here: [Z offset irregularities across the build surface - General / LulzBot TAZ - Lulzbot](https://forum.lulzbot.com/t/z-offset-irregularities-across-the-build-surface/22598)

Ultimately I gave up on the printer. Personally I would not buy a printer without mesh leveling with some kind of sensor, which is a common feature on printers nowadays. I spent a huge amount of time coming to this conclusion, and I hope I can save someone else time, money and frustration.

---

_[View the full topic](https://forum.lulzbot.com/t/workhorse-bed-is-not-level-after-bed-levelling/22903)._