# Wot filament for taz parts etc

**URL:** <https://forum.lulzbot.com/t/wot-filament-for-taz-parts-etc/21247>\
**Category:** Uncategorized\
**Created:** [April 6, 2020, 6:13pm UTC](https://forum.lulzbot.com/t/wot-filament-for-taz-parts-etc/21247 "2020-04-06T18:13:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![malcolmthemole](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@malcolmthemole](https://forum.lulzbot.com/u/malcolmthemole)\
**Post date:** [April 6, 2020, 6:13pm UTC](https://forum.lulzbot.com/t/wot-filament-for-taz-parts-etc/21247/1 "2020-04-06T18:13:47Z")

</div>

bog standard taz6 and original head… now to print spare bits for it…

here’s the question (and I expect lots of different opinions) what is the best filament to use?

must be hard wearing and I know what lulzbot use on the originals… but what do you think is best?

I like petg for many things and pla is easy… but what is your ideal choice?

---

<div class="post-metadata">

**Author:** ![Mtnhome1](https://avatars.discourse-cdn.com/v4/letter/m/a183cd/32.png) [@Mtnhome1](https://forum.lulzbot.com/u/Mtnhome1)\
**Post date:** [April 7, 2020, 12:14am UTC](https://forum.lulzbot.com/t/wot-filament-for-taz-parts-etc/21247/2 "2020-04-07T00:14:06Z")

</div>

Pretty sure all Lulzbot parts are ABS @70% infill

---

<div class="post-metadata">

**Author:** ![malcolmthemole](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@malcolmthemole](https://forum.lulzbot.com/u/malcolmthemole)\
**Post date:** [April 7, 2020, 12:48pm UTC](https://forum.lulzbot.com/t/wot-filament-for-taz-parts-etc/21247/3 "2020-04-07T12:48:32Z")

</div>

yup… I know lulzbot use ABS and always have

But my question is what would be YOUR choice of filament

As said, I like PETG for many things… what I didn’t say is most of my gears etc are in microwaved carbon nanotube ABS… but that doesn’t answer this question… YOUR choice of filament.