# Wrong Printer Detected

**URL:** <https://forum.lulzbot.com/t/wrong-printer-detected/6938>\
**Category:** LulzBot Mini\
**Created:** [October 6, 2019, 2:57am UTC](https://forum.lulzbot.com/t/wrong-printer-detected/6938 "2019-10-06T02:57:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jaybeckham](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jaybeckham](https://forum.lulzbot.com/u/jaybeckham)\
**Post date:** [October 6, 2019, 2:57am UTC](https://forum.lulzbot.com/t/wrong-printer-detected/6938/1 "2019-10-06T02:57:54Z")

</div>

Moved my Mini 1 with the new SL 0.25 nozzle to another computer. Downloaded 3.6.20 latest version. When I try to connect get the message.  
Earlier on my other computer, it worked fine with the same version of Cura.  
Also after installing the new nozzle I updated the firmware.  
I have selected: Lulzbot Mini|SL|0.25mm

Uninstalled and downloaded again and same message.

Thanks

---

<div class="post-metadata">

**Author:** ![jaybeckham](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jaybeckham](https://forum.lulzbot.com/u/jaybeckham)\
**Post date:** [October 6, 2019, 3:35am UTC](https://forum.lulzbot.com/t/wrong-printer-detected/6938/2 "2019-10-06T03:35:03Z")

</div>

For some reason I had to update the firmware again. Same version of Cura so I don’t know why as the firmware should of been in the printer from the last update.  
So now it appears to be working properly.  
Thanks